![]() Good for recovering items on the bottom, or for wreck reef anchoring. Some models are made of bent re-bar, others are made of galvanized metal and have folding flukes. Very inexpensive, but not much holding power. Generally only used by very large ships, as it relies on weight for most of the holding power not really suitable for recreational use other than for a lunch hook. Not good in mud or loose sand, where flukes can't dig in.įunctions differently than previous anchors as it is not a burying anchor one arm digs into bottom and one lies exposed. Good in heavy grass, weeds, rocky bottoms or hard sand where one arm can penetrate a crevice. Kedge or Navy AnchorsĪ more traditional style anchor with arks, flukes and stock. Also not recommended for grassy bottoms, which the flukes tend to slip off. Not recommended for very soft or loose mud, which can ball up around the flukes or on rocky bottoms where the flukes cannot penetrate. Best in hard sand or mud, where flukes can easily dig into the bottom. ![]() When dropped, flukes dig the anchor into the bottom and the anchor buries itself and part of the anchor line.Ĭommonly used on small recreational boats, as they are relatively light weight for the amount of holding power they provide, especially in comparison to other anchors. Lightweight type anchor with two long pivoting "flukes" designed to reduce clogging with mud and grass range from 2.5 pounds to nearly 200 pounds, and are generally made of cast galvanized metal, though some models are machined from a light-weight aluminum composite. Then, choose a size based on the size and weight of your boat. There are several types of anchors and you should choose a style based on the bottom characteristics in the areas you will anchor most often. Keep in mind that a 10,000 pound boat may only require an anchor with a holding power of a few hundred pounds on a calm day, but may need 1,000 pounds of holding power or more on a stormy day. And don't forget the weather-high winds, tides and waves can all make anchoring difficult, if not impossible.Īnchors are rated by "holding power"-which is the ability of an anchor to hold a given weight.
0 Comments
Leave a Reply. |